# coding: utf-8
# AUTO-GENERATED FILE -- DO NOT EDIT
# OVERRIDES FILE: static-pi-files/2.2/socketoverride.py

""" This module provides socket operations and some related functions.
On Unix, it supports IP (Internet Protocol) and Unix domain sockets.
On other systems, it only supports IP. Functions specific for a
socket are available as methods of the socket object.

Functions:

socket() -- create a new socket object
socketpair() -- create a pair of new socket objects [*]
fromfd() -- create a socket object from an open file descriptor [*]
gethostname() -- return the current hostname
gethostbyname() -- map a hostname to its IP number
gethostbyaddr() -- map an IP number or hostname to DNS info
getservbyname() -- map a service name and a protocol name to a port number
getprotobyname() -- map a protocol name (e.g. 'tcp') to a number
ntohs(), ntohl() -- convert 16, 32 bit int from network to host byte order
htons(), htonl() -- convert 16, 32 bit int from host to network byte order
inet_aton() -- convert IP addr string (123.45.67.89) to 32-bit packed format
inet_ntoa() -- convert 32-bit packed format IP to string (123.45.67.89)
ssl() -- secure socket layer support (only available if configured)
socket.getdefaulttimeout() -- get the default timeout value
socket.setdefaulttimeout() -- set the default timeout value
create_connection() -- connects to an address, with an optional timeout and
                       optional source address.

 [*] not available on all platforms!

Special objects:

SocketType -- type object for socket objects
error -- exception raised for I/O errors
has_ipv6 -- boolean value indicating if IPv6 is supported

Integer constants:

AF_INET, AF_UNIX -- socket domains (first argument to socket() call)
SOCK_STREAM, SOCK_DGRAM, SOCK_RAW -- socket types (second argument)

Many other constants may be defined; these may be used in calls to
the setsockopt() and getsockopt() methods.
 """

AF_APPLETALK = 5
AF_ASH = 18
AF_ATMPVC = 8
AF_ATMSVC = 20
AF_AX25 = 3
AF_BRIDGE = 7
AF_DECnet = 12
AF_ECONET = 19
AF_INET = 2
AF_INET6 = 10
AF_IPX = 4
AF_IRDA = 23
AF_KEY = 15
AF_LLC = 26
AF_NETBEUI = 13
AF_NETLINK = 16
AF_NETROM = 6
AF_PACKET = 17
AF_PPPOX = 24
AF_ROSE = 11
AF_ROUTE = 16
AF_SECURITY = 14
AF_SNA = 22
AF_TIPC = 30
AF_UNIX = 1
AF_UNSPEC = 0
AF_WANPIPE = 25
AF_X25 = 9
AI_ADDRCONFIG = 32
AI_ALL = 16
AI_CANONNAME = 2
AI_NUMERICHOST = 4
AI_NUMERICSERV = 1024
AI_PASSIVE = 1
AI_V4MAPPED = 8
CAPI = None
EAI_ADDRFAMILY = -9
EAI_AGAIN = -3
EAI_BADFLAGS = -1
EAI_FAIL = -4
EAI_FAMILY = -6
EAI_MEMORY = -10
EAI_NODATA = -5
EAI_NONAME = -2
EAI_OVERFLOW = -12
EAI_SERVICE = -8
EAI_SOCKTYPE = -7
EAI_SYSTEM = -11
INADDR_ALLHOSTS_GROUP = 3758096385
INADDR_ANY = 0
INADDR_BROADCAST = 4294967295
INADDR_LOOPBACK = 2130706433
INADDR_MAX_LOCAL_GROUP = 3758096639
INADDR_NONE = 4294967295
INADDR_UNSPEC_GROUP = 3758096384
IPPORT_RESERVED = 1024
IPPORT_USERRESERVED = 5000
IPPROTO_AH = 51
IPPROTO_DSTOPTS = 60
IPPROTO_EGP = 8
IPPROTO_ESP = 50
IPPROTO_FRAGMENT = 44
IPPROTO_GRE = 47
IPPROTO_HOPOPTS = 0
IPPROTO_ICMP = 1
IPPROTO_ICMPV6 = 58
IPPROTO_IDP = 22
IPPROTO_IGMP = 2
IPPROTO_IP = 0
IPPROTO_IPIP = 4
IPPROTO_IPV6 = 41
IPPROTO_NONE = 59
IPPROTO_PIM = 103
IPPROTO_PUP = 12
IPPROTO_RAW = 255
IPPROTO_ROUTING = 43
IPPROTO_RSVP = 46
IPPROTO_TCP = 6
IPPROTO_TP = 29
IPPROTO_UDP = 17
IPV6_CHECKSUM = 7
IPV6_DSTOPTS = 59
IPV6_HOPLIMIT = 52
IPV6_HOPOPTS = 54
IPV6_JOIN_GROUP = 20
IPV6_LEAVE_GROUP = 21
IPV6_MULTICAST_HOPS = 18
IPV6_MULTICAST_IF = 17
IPV6_MULTICAST_LOOP = 19
IPV6_NEXTHOP = 9
IPV6_PKTINFO = 50
IPV6_RECVDSTOPTS = 58
IPV6_RECVHOPLIMIT = 51
IPV6_RECVHOPOPTS = 53
IPV6_RECVPKTINFO = 49
IPV6_RECVRTHDR = 56
IPV6_RECVTCLASS = 66
IPV6_RTHDR = 57
IPV6_RTHDRDSTOPTS = 55
IPV6_RTHDR_TYPE_0 = 0
IPV6_TCLASS = 67
IPV6_UNICAST_HOPS = 16
IPV6_V6ONLY = 26
IP_ADD_MEMBERSHIP = 35
IP_DEFAULT_MULTICAST_LOOP = 1
IP_DEFAULT_MULTICAST_TTL = 1
IP_DROP_MEMBERSHIP = 36
IP_HDRINCL = 3
IP_MAX_MEMBERSHIPS = 20
IP_MULTICAST_IF = 32
IP_MULTICAST_LOOP = 34
IP_MULTICAST_TTL = 33
IP_OPTIONS = 4
IP_RECVOPTS = 6
IP_RECVRETOPTS = 7
IP_RETOPTS = 7
IP_TOS = 1
IP_TTL = 2
MSG_CTRUNC = 8
MSG_DONTROUTE = 4
MSG_DONTWAIT = 64
MSG_EOR = 128
MSG_OOB = 1
MSG_PEEK = 2
MSG_TRUNC = 32
MSG_WAITALL = 256
NETLINK_DNRTMSG = 14
NETLINK_FIREWALL = 3
NETLINK_IP6_FW = 13
NETLINK_NFLOG = 5
NETLINK_ROUTE = 0
NETLINK_USERSOCK = 2
NETLINK_XFRM = 6
NI_DGRAM = 16
NI_MAXHOST = 1025
NI_MAXSERV = 32
NI_NAMEREQD = 8
NI_NOFQDN = 4
NI_NUMERICHOST = 1
NI_NUMERICSERV = 2
PACKET_BROADCAST = 1
PACKET_FASTROUTE = 6
PACKET_HOST = 0
PACKET_LOOPBACK = 5
PACKET_MULTICAST = 2
PACKET_OTHERHOST = 3
PACKET_OUTGOING = 4
PF_PACKET = 17
SHUT_RD = 0
SHUT_RDWR = 2
SHUT_WR = 1
SOCK_DGRAM = 2
SOCK_RAW = 3
SOCK_RDM = 4
SOCK_SEQPACKET = 5
SOCK_STREAM = 1
SOL_IP = 0
SOL_SOCKET = 1
SOL_TCP = 6
SOL_TIPC = 271
SOL_UDP = 17
SOMAXCONN = 128
SO_ACCEPTCONN = 30
SO_BROADCAST = 6
SO_DEBUG = 1
SO_DONTROUTE = 5
SO_ERROR = 4
SO_KEEPALIVE = 9
SO_LINGER = 13
SO_OOBINLINE = 10
SO_RCVBUF = 8
SO_RCVLOWAT = 18
SO_RCVTIMEO = 20
SO_REUSEADDR = 2
SO_REUSEPORT = 15
SO_SNDBUF = 7
SO_SNDLOWAT = 19
SO_SNDTIMEO = 21
SO_TYPE = 3

class SocketType(object):
  """ socket([family[, type[, proto]]]) -> socket object
  
  Open a socket of the given type.  The family argument specifies the
  address family; it defaults to AF_INET.  The type argument specifies
  whether this is a stream (SOCK_STREAM, this is the default)
  or datagram (SOCK_DGRAM) socket.  The protocol argument defaults to 0,
  specifying the default protocol.  Keyword arguments are accepted.
  
  A socket object represents one endpoint of a network connection.
  
  Methods of socket objects (keyword arguments not allowed):
  
  accept() -- accept a connection, returning new socket and client address
  bind(addr) -- bind the socket to a local address
  close() -- close the socket
  connect(addr) -- connect the socket to a remote address
  connect_ex(addr) -- connect, return an error code instead of an exception
  dup() -- return a new socket object identical to the current one [*]
  fileno() -- return underlying file descriptor
  getpeername() -- return remote address [*]
  getsockname() -- return local address
  getsockopt(level, optname[, buflen]) -- get socket options
  gettimeout() -- return timeout or None
  listen(n) -- start listening for incoming connections
  makefile([mode, [bufsize]]) -- return a file object for the socket [*]
  recv(buflen[, flags]) -- receive data
  recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)
  recvfrom(buflen[, flags]) -- receive data and sender's address
  recvfrom_into(buffer[, nbytes, [, flags])
    -- receive data and sender's address (into a buffer)
  sendall(data[, flags]) -- send all data
  send(data[, flags]) -- send data, may not send all of it
  sendto(data[, flags], addr) -- send data to a given address
  setblocking(0 | 1) -- set or clear the blocking I/O flag
  setsockopt(level, optname, value) -- set socket options
  settimeout(None | float) -- set or clear the timeout
  shutdown(how) -- shut down traffic in one or both directions
  
   [*] not available on all platforms! """

  def __init__(self, family=None, type=None, proto=None):
    return SocketType()

  _sock = None
  family = property(None, None, None,
                    """ the socket family """
                    )


  def gettimeout(self):
    """ gettimeout() -> timeout
    
    Returns the timeout in seconds (float) associated with socket 
    operations. A timeout of None indicates that timeouts on socket 
    operations are disabled. """
    return None

  proto = property(None, None, None,
                   """ the socket protocol """
                   )

  recv_into = None
  recvfrom_into = None

  def settimeout(self, timeout):
    """ settimeout(timeout)
    
    Set a timeout on socket operations.  'timeout' can be a float,
    giving in seconds, or None.  Setting a timeout of None disables
    the timeout feature and is equivalent to setblocking(1).
    Setting a timeout of zero is the same as setblocking(0). """
    pass

  type = property(None, None, None,
                  """ the socket type """
                  )

  # BEGIN MANUAL OVERRIDES FROM static-pi-files/2.2/socketoverride.py
  def accept(self):
    """ accept() -> (socket object, address info)
    
    Wait for an incoming connection.  Return a new socket representing the
    connection, and the address of the client.  For IP sockets, the address
    info is a pair (hostaddr, port). """

    return (SocketType(), info)

  def bind(self, address):
    """ bind(address)
    
    Bind the socket to a local address.  For IP sockets, the address is a
    pair (host, port); the host must refer to the local host. For raw packet
    sockets the address is a tuple (ifname, proto [,pkttype [,hatype]]) """

    pass

  def close(self):
    """ close()
    
    Close the socket.  It cannot be used after this call. """

    pass

  def connect(self, address):
    """ connect(address)
    
    Connect the socket to a remote address.  For IP sockets, the address
    is a pair (host, port). """

    pass

  def connect_ex(self, address):
    """ connect_ex(address)
    
    This is like connect(address), but returns an error code (the errno value)
    instead of raising an exception when an error occurs. """

    return 1

  def dup(self):
    """ dup() -> socket object
    
    Return a new socket object connected to the same system resource. """

    return SocketType()

  def fileno(self):
    """ fileno() -> integer
    
    Return the integer file descriptor of the socket. """

    return 1

  def getpeername(self):
    """ getpeername() -> address info
    
    Return the address of the remote endpoint.  For IP sockets, the address
    info is a pair (hostaddr, port). """

    return ('', 1)

  def getsockname(self):
    """ getsockname() -> address info
    
    Return the address of the local endpoint.  For IP sockets, the address
    info is a pair (hostaddr, port). """

    return ('', 1)

  def getsockopt(self, level, option, buffersize = -1):
    """ getsockopt(level, option[, buffersize]) -> value
    
    Get a socket option.  See the Unix manual for level and option.
    If a nonzero buffersize argument is given, the return value is a
    string of that length; otherwise it is an integer. """

    return object

  def listen(self, backlog):
    """ listen(backlog)
    
    Enable a server to accept connections.  The backlog argument must be at
    least 1; it specifies the number of unaccepted connection that the system
    will allow before refusing new connections. """

    pass

  def makefile(self, mode, buffersize = -1):
    """ makefile([mode[, buffersize]]) -> file object
    
    Return a regular file object corresponding to the socket.
    The mode and buffersize arguments are as for the built-in open() function. """

    return open()

  def recv(self, buffersize, flags = 0):
    """ recv(buffersize[, flags]) -> data
    
    Receive up to buffersize bytes from the socket.  For the optional flags
    argument, see the Unix manual.  When no data is available, block until
    at least one byte is available or until the remote end is closed.  When
    the remote end is closed and all data is read, return the empty string. """

    return ''

  def recvfrom(self, buffersize, flags = 0):
    """ recvfrom(buffersize[, flags]) -> (data, address info)
    
    Like recv(buffersize, flags) but also return the sender's address info. """

    return ('', info)

  def send(self, data, flags=0):
    """ send(data[, flags]) -> count
    
    Send a data string to the socket.  For the optional flags
    argument, see the Unix manual.  Return the number of bytes
    sent; this may be less than len(data) if the network is busy. """

    return 1

  def sendall(self, data, flags=0):
    """ sendall(data[, flags])
    
    Send a data string to the socket.  For the optional flags
    argument, see the Unix manual.  This calls send() repeatedly
    until all data is sent.  If an error occurs, it's impossible
    to tell how much data has been sent. """

    pass

  def sendto(self, data, flags=0, address=('', 0)):
    """ sendto(data[, flags], address)
    
    Like send(data, flags) but allows specifying the destination address.
    For IP sockets, the address is a pair (hostaddr, port). """

    return 1

  def setblocking(self, flag):
    """ setblocking(flag)
    
    Set the socket to blocking (flag is true) or non-blocking (false).
    This uses the FIONBIO ioctl with the O_NDELAY flag. """

    pass

  def setsockopt(self, level, option, value):
    """ setsockopt(level, option, value)
    
    Set a socket option.  See the Unix manual for level and option.
    The value argument can either be an integer or a string. """

    pass

  def shutdown(self, flag):
    """ shutdown(flag)
    
    Shut down the reading side of the socket (flag == 0), the writing side
    of the socket (flag == 1), or both ends (flag == 2). """

    pass

  # END MANUAL OVERRIDES
TCP_CORK = 3
TCP_DEFER_ACCEPT = 9
TCP_INFO = 11
TCP_KEEPCNT = 6
TCP_KEEPIDLE = 4
TCP_KEEPINTVL = 5
TCP_LINGER2 = 8
TCP_MAXSEG = 2
TCP_NODELAY = 1
TCP_QUICKACK = 12
TCP_SYNCNT = 7
TCP_WINDOW_CLAMP = 10
TIPC_ADDR_ID = 3
TIPC_ADDR_NAME = 2
TIPC_ADDR_NAMESEQ = 1
TIPC_CFG_SRV = 0
TIPC_CLUSTER_SCOPE = 2
TIPC_CONN_TIMEOUT = 130
TIPC_CRITICAL_IMPORTANCE = 3
TIPC_DEST_DROPPABLE = 129
TIPC_HIGH_IMPORTANCE = 2
TIPC_IMPORTANCE = 127
TIPC_LOW_IMPORTANCE = 0
TIPC_MEDIUM_IMPORTANCE = 1
TIPC_NODE_SCOPE = 3
TIPC_PUBLISHED = 1
TIPC_SRC_DROPPABLE = 128
TIPC_SUBSCR_TIMEOUT = 3
TIPC_SUB_CANCEL = 4
TIPC_SUB_PORTS = 1
TIPC_SUB_SERVICE = 2
TIPC_TOP_SRV = 1
TIPC_WAIT_FOREVER = -1
TIPC_WITHDRAWN = 2
TIPC_ZONE_SCOPE = 1

def create_connection(arg0, arg1):
  """ Connect to *address* and return the socket object.
  
      Convenience function.  Connect to *address* (a 2-tuple ``(host,
      port)``) and return the socket object.  Passing the optional
      *timeout* parameter will set the timeout on the socket instance
      before attempting to connect.  If no *timeout* is supplied, the
      global default timeout setting returned by :func:`getdefaulttimeout`
      is used.  If *source_address* is set it must be a tuple of (host, port)
      for the socket to bind as a source address before making the connection.
      A host of '' or port 0 tells the OS to use the default.
       """
  pass

class error(IOError):

  pass

def fromfd(fd, family, type, proto=None):
  """ fromfd(fd, family, type[, proto]) -> socket object
  
  Create a socket object from a duplicate of the given
  file descriptor.
  The remaining arguments are the same as for socket(). """
  return SocketType()

class gaierror(error):

  pass

def getaddrinfo(host, port, family=None, socktype=None, proto=None, flags=None):
  """ getaddrinfo(host, port [, family, socktype, proto, flags])
      -> list of (family, socktype, proto, canonname, sockaddr)
  
  Resolve host and port into addrinfo struct. """
  pass

def getdefaulttimeout():
  """ getdefaulttimeout() -> timeout
  
  Returns the default timeout in seconds (float) for new socket objects.
  A value of None indicates that new socket objects have no timeout.
  When the socket module is first imported, the default is None. """
  return None

def gethostbyaddr(host):
  """ gethostbyaddr(host) -> (name, aliaslist, addresslist)
  
  Return the true host name, a list of aliases, and a list of IP addresses,
  for a host.  The host argument is a string giving a host name or IP number. """
  return (None, [], [])

def gethostbyname(host):
  """ gethostbyname(host) -> address
  
  Return the IP address (a string of the form '255.255.255.255') for a host. """
  return None

def gethostbyname_ex(host):
  """ gethostbyname_ex(host) -> (name, aliaslist, addresslist)
  
  Return the true host name, a list of aliases, and a list of IP addresses,
  for a host.  The host argument is a string giving a host name or IP number. """
  return (None, [], [])

def gethostname():
  """ gethostname() -> string
  
  Return the current host name. """
  return ""

def getnameinfo(sockaddr, flags):
  """ getnameinfo(sockaddr, flags) --> (host, port)
  
  Get host and port for a sockaddr. """
  return (None, None)

def getprotobyname(name):
  """ getprotobyname(name) -> integer
  
  Return the protocol number for the named protocol.  (Rarely used.) """
  return 1

def getservbyname(servicename, protocolname=None):
  """ getservbyname(servicename[, protocolname]) -> integer
  
  Return a port number from a service name and protocol name.
  The optional protocol name, if given, should be 'tcp' or 'udp',
  otherwise any protocol will match. """
  return 1

def getservbyport(port, protocolname=None):
  """ getservbyport(port[, protocolname]) -> string
  
  Return the service name from a port number and protocol name.
  The optional protocol name, if given, should be 'tcp' or 'udp',
  otherwise any protocol will match. """
  return ""

has_ipv6 = True

class herror(error):

  pass

def htonl(integer):
  """ htonl(integer) -> integer
  
  Convert a 32-bit integer from host to network byte order. """
  return 1

def htons(integer):
  """ htons(integer) -> integer
  
  Convert a 16-bit integer from host to network byte order. """
  return 1

def inet_aton(string):
  """ inet_aton(string) -> packed 32-bit IP representation
  
  Convert an IP address in string format (123.45.67.89) to the 32-bit packed
  binary format used in low-level network functions. """
  return None

def inet_ntoa(packed_ip):
  """ inet_ntoa(packed_ip) -> ip_address_string
  
  Convert an IP address from 32-bit packed binary format to string format """
  return ""

def inet_ntop(af, packed_ip):
  """ inet_ntop(af, packed_ip) -> string formatted IP address
  
  Convert a packed IP address of the given family to string format. """
  return ""

def inet_pton(af, ip):
  """ inet_pton(af, ip) -> packed IP address string
  
  Convert an IP address from string format to a packed string suitable
  for use with low-level network functions. """
  return ""

def ntohl(integer):
  """ ntohl(integer) -> integer
  
  Convert a 32-bit integer from network to host byte order. """
  return 1

def ntohs(integer):
  """ ntohs(integer) -> integer
  
  Convert a 16-bit integer from network to host byte order. """
  return 1

def setdefaulttimeout(timeout):
  """ setdefaulttimeout(timeout)
  
  Set the default timeout in seconds (float) for new socket objects.
  A value of None indicates that new socket objects have no timeout.
  When the socket module is first imported, the default is None. """
  pass

def socketpair(family=None, type=None, proto=None):
  """ socketpair([family[, type[, proto]]]) -> (socket object, socket object)
  
  Create a pair of socket objects from the sockets returned by the platform
  socketpair() function.
  The arguments are the same as for socket() except the default family is
  AF_UNIX if defined on the platform; otherwise, the default is AF_INET. """
  return (SocketType(), SocketType())

class timeout(error):

  pass

# BEGIN MANUAL OVERRIDES FROM static-pi-files/2.2/socketoverride.py
__builtins__ = {}
__doc__ = None
__file__ = '/home/shared/src/ide/build-files/static-pi-files/2.2/socketoverride.py'
__name__ = 'socketoverride'
__package__ = None
def getfqdn(name):
  """ getfqdn(name) -> string 
  Get fully qualified domain name from name.
  
  An empty argument is interpreted as meaning the local host.
    
  First the hostname returned by gethostbyaddr() is checked, then
  possibly existing aliases. In case no FQDN is available, hostname
  is returned.
  """

  return ''

# END MANUAL OVERRIDES