# coding: utf-8
# AUTO-GENERATED FILE -- DO NOT EDIT

""" Implementation module for socket operations.

See the socket module for documentation. """

AF_APPLETALK = 16
AF_DECnet = 12
AF_INET = 2
AF_INET6 = 23
AF_IPX = 6
AF_IRDA = 26
AF_SNA = 11
AF_UNSPEC = 0
AI_ADDRCONFIG = 1024
AI_ALL = 256
AI_CANONNAME = 2
AI_NUMERICHOST = 4
AI_NUMERICSERV = 8
AI_PASSIVE = 1
AI_V4MAPPED = 2048
CAPI = None
EAI_AGAIN = 11002
EAI_BADFLAGS = 10022
EAI_FAIL = 11003
EAI_FAMILY = 10047
EAI_MEMORY = 8
EAI_NODATA = 11001
EAI_NONAME = 11001
EAI_SERVICE = 10109
EAI_SOCKTYPE = 10044
INADDR_ALLHOSTS_GROUP = -536870911
INADDR_ANY = 0
INADDR_BROADCAST = -1
INADDR_LOOPBACK = 2130706433
INADDR_MAX_LOCAL_GROUP = -536870657
INADDR_NONE = -1
INADDR_UNSPEC_GROUP = -536870912
IPPORT_RESERVED = 1024
IPPORT_USERRESERVED = 5000
IPPROTO_AH = 51
IPPROTO_CBT = 7
IPPROTO_DSTOPTS = 60
IPPROTO_EGP = 8
IPPROTO_ESP = 50
IPPROTO_FRAGMENT = 44
IPPROTO_GGP = 3
IPPROTO_HOPOPTS = 0
IPPROTO_ICLFXBM = 78
IPPROTO_ICMP = 1
IPPROTO_ICMPV6 = 58
IPPROTO_IDP = 22
IPPROTO_IGMP = 2
IPPROTO_IGP = 9
IPPROTO_IP = 0
IPPROTO_IPV4 = 4
IPPROTO_IPV6 = 41
IPPROTO_L2TP = 115
IPPROTO_MAX = 256
IPPROTO_ND = 77
IPPROTO_NONE = 59
IPPROTO_PGM = 113
IPPROTO_PIM = 103
IPPROTO_PUP = 12
IPPROTO_RAW = 255
IPPROTO_RDP = 27
IPPROTO_ROUTING = 43
IPPROTO_SCTP = 132
IPPROTO_ST = 5
IPPROTO_TCP = 6
IPPROTO_UDP = 17
IPV6_CHECKSUM = 26
IPV6_DONTFRAG = 14
IPV6_HOPLIMIT = 21
IPV6_HOPOPTS = 1
IPV6_JOIN_GROUP = 12
IPV6_LEAVE_GROUP = 13
IPV6_MULTICAST_HOPS = 10
IPV6_MULTICAST_IF = 9
IPV6_MULTICAST_LOOP = 11
IPV6_PKTINFO = 19
IPV6_RECVRTHDR = 38
IPV6_RECVTCLASS = 40
IPV6_RTHDR = 32
IPV6_TCLASS = 39
IPV6_UNICAST_HOPS = 4
IPV6_V6ONLY = 27
IP_ADD_MEMBERSHIP = 12
IP_DROP_MEMBERSHIP = 13
IP_HDRINCL = 2
IP_MULTICAST_IF = 9
IP_MULTICAST_LOOP = 11
IP_MULTICAST_TTL = 10
IP_OPTIONS = 1
IP_RECVDSTADDR = 25
IP_TOS = 3
IP_TTL = 4
MSG_BCAST = 1024
MSG_CTRUNC = 512
MSG_DONTROUTE = 4
MSG_ERRQUEUE = 4096
MSG_MCAST = 2048
MSG_OOB = 1
MSG_PEEK = 2
MSG_TRUNC = 256
MSG_WAITALL = 8
NI_DGRAM = 16
NI_MAXHOST = 1025
NI_MAXSERV = 32
NI_NAMEREQD = 4
NI_NOFQDN = 1
NI_NUMERICHOST = 2
NI_NUMERICSERV = 8
RCVALL_MAX = 3
RCVALL_OFF = 0
RCVALL_ON = 1
RCVALL_SOCKETLEVELONLY = 2
SHUT_RD = 0
SHUT_RDWR = 2
SHUT_WR = 1
SIO_KEEPALIVE_VALS = 2550136836
SIO_LOOPBACK_FAST_PATH = 2550136848
SIO_RCVALL = 2550136833
SOCK_DGRAM = 2
SOCK_RAW = 3
SOCK_RDM = 4
SOCK_SEQPACKET = 5
SOCK_STREAM = 1
SOL_IP = 0
SOL_SOCKET = 65535
SOL_TCP = 6
SOL_UDP = 17
SOMAXCONN = 2147483647
SO_ACCEPTCONN = 2
SO_BROADCAST = 32
SO_DEBUG = 1
SO_DONTROUTE = 16
SO_ERROR = 4103
SO_EXCLUSIVEADDRUSE = -5
SO_KEEPALIVE = 8
SO_LINGER = 128
SO_OOBINLINE = 256
SO_RCVBUF = 4098
SO_RCVLOWAT = 4100
SO_RCVTIMEO = 4102
SO_REUSEADDR = 4
SO_SNDBUF = 4097
SO_SNDLOWAT = 4099
SO_SNDTIMEO = 4101
SO_TYPE = 4104
SO_USELOOPBACK = 64

SocketType = socket
TCP_FASTOPEN = 15
TCP_KEEPCNT = 16
TCP_KEEPIDLE = 3
TCP_KEEPINTVL = 17
TCP_MAXSEG = 4
TCP_NODELAY = 1
__doc__ = """Implementation module for socket operations.

See the socket module for documentation."""
__file__ = 'C:\\src\\ide\\build-files\\build-temp\\runtimes-release\\__os__\\win32\\runtime-python3.8\\DLLs\\_socket.pyd'
__loader__ = None
__name__ = '_socket'
__package__ = ''
__spec__ = None

def close(integer):
  """ close(integer) -> None
  
  Close an integer socket file descriptor.  This is like os.close(), but for
  sockets; on some platforms os.close() won't work for socket file descriptors. """
  return None

def dup(integer):
  """ dup(integer) -> integer
  
  Duplicate an integer socket file descriptor.  This is like os.dup(), but for
  sockets; on some platforms os.dup() won't work for socket file descriptors. """
  return 1

class error(Exception):
  """ Base class for I/O related errors. """

  def __init__(self, *args, **kwargs):
    pass

  characters_written = property(None, None, None,
                                )

  errno = None
  filename = None
  filename2 = None
  strerror = None
  winerror = None

class gaierror(OSError):

  pass

def getaddrinfo(host, port, family=None, type=None, proto=None, flags=None):
  """ getaddrinfo(host, port [, family, type, proto, flags])
      -> list of (family, type, proto, canonname, sockaddr)
  
  Resolve host and port into addrinfo struct. """
  pass

def getdefaulttimeout():
  """ getdefaulttimeout() -> timeout
  
  Returns the default timeout in seconds (float) for new socket objects.
  A value of None indicates that new socket objects have no timeout.
  When the socket module is first imported, the default is None. """
  return None

def gethostbyaddr(host):
  """ gethostbyaddr(host) -> (name, aliaslist, addresslist)
  
  Return the true host name, a list of aliases, and a list of IP addresses,
  for a host.  The host argument is a string giving a host name or IP number. """
  return (None, [], [])

def gethostbyname(host):
  """ gethostbyname(host) -> address
  
  Return the IP address (a string of the form '255.255.255.255') for a host. """
  return None

def gethostbyname_ex(host):
  """ gethostbyname_ex(host) -> (name, aliaslist, addresslist)
  
  Return the true host name, a list of aliases, and a list of IP addresses,
  for a host.  The host argument is a string giving a host name or IP number. """
  return (None, [], [])

def gethostname():
  """ gethostname() -> string
  
  Return the current host name. """
  return ""

def getnameinfo(sockaddr, flags):
  """ getnameinfo(sockaddr, flags) --> (host, port)
  
  Get host and port for a sockaddr. """
  return (None, None)

def getprotobyname(name):
  """ getprotobyname(name) -> integer
  
  Return the protocol number for the named protocol.  (Rarely used.) """
  return 1

def getservbyname(servicename, protocolname=None):
  """ getservbyname(servicename[, protocolname]) -> integer
  
  Return a port number from a service name and protocol name.
  The optional protocol name, if given, should be 'tcp' or 'udp',
  otherwise any protocol will match. """
  return 1

def getservbyport(port, protocolname=None):
  """ getservbyport(port[, protocolname]) -> string
  
  Return the service name from a port number and protocol name.
  The optional protocol name, if given, should be 'tcp' or 'udp',
  otherwise any protocol will match. """
  return ""

has_ipv6 = True

class herror(OSError):

  pass

def htonl(integer):
  """ htonl(integer) -> integer
  
  Convert a 32-bit integer from host to network byte order. """
  return 1

def htons(integer):
  """ htons(integer) -> integer
  
  Convert a 16-bit unsigned integer from host to network byte order.
  Note that in case the received integer does not fit in 16-bit unsigned
  integer, but does fit in a positive C int, it is silently truncated to
  16-bit unsigned integer.
  However, this silent truncation feature is deprecated, and will raise an
  exception in future versions of Python. """
  return 1

def if_indextoname(if_index):
  """ if_indextoname(if_index)
  
  Returns the interface name corresponding to the interface index if_index. """
  pass

def if_nameindex():
  """ if_nameindex()
  
  Returns a list of network interface information (index, name) tuples. """
  pass

def if_nametoindex(if_name):
  """ if_nametoindex(if_name)
  
  Returns the interface index corresponding to the interface name if_name. """
  pass

def inet_aton(string):
  """ inet_aton(string) -> bytes giving packed 32-bit IP representation
  
  Convert an IP address in string format (123.45.67.89) to the 32-bit packed
  binary format used in low-level network functions. """
  return None

def inet_ntoa(packed_ip):
  """ inet_ntoa(packed_ip) -> ip_address_string
  
  Convert an IP address from 32-bit packed binary format to string format """
  return ""

def inet_ntop(af, packed_ip):
  """ inet_ntop(af, packed_ip) -> string formatted IP address
  
  Convert a packed IP address of the given family to string format. """
  return ""

def inet_pton(af, ip):
  """ inet_pton(af, ip) -> packed IP address string
  
  Convert an IP address from string format to a packed string suitable
  for use with low-level network functions. """
  return ""

def ntohl(integer):
  """ ntohl(integer) -> integer
  
  Convert a 32-bit integer from network to host byte order. """
  return 1

def ntohs(integer):
  """ ntohs(integer) -> integer
  
  Convert a 16-bit unsigned integer from network to host byte order.
  Note that in case the received integer does not fit in 16-bit unsigned
  integer, but does fit in a positive C int, it is silently truncated to
  16-bit unsigned integer.
  However, this silent truncation feature is deprecated, and will raise an
  exception in future versions of Python. """
  return 1

def setdefaulttimeout(timeout):
  """ setdefaulttimeout(timeout)
  
  Set the default timeout in seconds (float) for new socket objects.
  A value of None indicates that new socket objects have no timeout.
  When the socket module is first imported, the default is None. """
  pass

class socket(object):
  """ socket(family=AF_INET, type=SOCK_STREAM, proto=0) -> socket object
  socket(family=-1, type=-1, proto=-1, fileno=None) -> socket object
  
  Open a socket of the given type.  The family argument specifies the
  address family; it defaults to AF_INET.  The type argument specifies
  whether this is a stream (SOCK_STREAM, this is the default)
  or datagram (SOCK_DGRAM) socket.  The protocol argument defaults to 0,
  specifying the default protocol.  Keyword arguments are accepted.
  The socket is created as non-inheritable.
  
  When a fileno is passed in, family, type and proto are auto-detected,
  unless they are explicitly set.
  
  A socket object represents one endpoint of a network connection.
  
  Methods of socket objects (keyword arguments not allowed):
  
  _accept() -- accept connection, returning new socket fd and client address
  bind(addr) -- bind the socket to a local address
  close() -- close the socket
  connect(addr) -- connect the socket to a remote address
  connect_ex(addr) -- connect, return an error code instead of an exception
  dup() -- return a new socket fd duplicated from fileno()
  fileno() -- return underlying file descriptor
  getpeername() -- return remote address [*]
  getsockname() -- return local address
  getsockopt(level, optname[, buflen]) -- get socket options
  gettimeout() -- return timeout or None
  listen([n]) -- start listening for incoming connections
  recv(buflen[, flags]) -- receive data
  recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)
  recvfrom(buflen[, flags]) -- receive data and sender's address
  recvfrom_into(buffer[, nbytes, [, flags])
    -- receive data and sender's address (into a buffer)
  sendall(data[, flags]) -- send all data
  send(data[, flags]) -- send data, may not send all of it
  sendto(data[, flags], addr) -- send data to a given address
  setblocking(0 | 1) -- set or clear the blocking I/O flag
  getblocking() -- return True if socket is blocking, False if non-blocking
  setsockopt(level, optname, value[, optlen]) -- set socket options
  settimeout(None | float) -- set or clear the timeout
  shutdown(how) -- shut down traffic in one or both directions
  if_nameindex() -- return all network interface indices and names
  if_nametoindex(name) -- return the corresponding interface index
  if_indextoname(index) -- return the corresponding interface name
  
   [*] not available on all platforms! """

  def __init__(self, *args, **kwargs):
    return SocketType()

  def _accept(self):
    """ _accept() -> (integer, address info)
    
    Wait for an incoming connection.  Return a new socket file descriptor
    representing the connection, and the address of the client.
    For IP sockets, the address info is a pair (hostaddr, port). """
    return (1, None)

  def bind(self, address):
    """ bind(address)
    
    Bind the socket to a local address.  For IP sockets, the address is a
    pair (host, port); the host must refer to the local host. For raw packet
    sockets the address is a tuple (ifname, proto [,pkttype [,hatype [,addr]]]) """
    pass

  def close(self):
    """ close()
    
    Close the socket.  It cannot be used after this call. """
    pass

  def connect(self, address):
    """ connect(address)
    
    Connect the socket to a remote address.  For IP sockets, the address
    is a pair (host, port). """
    pass

  def connect_ex(self, address):
    """ connect_ex(address) -> errno
    
    This is like connect(address), but returns an error code (the errno value)
    instead of raising an exception when an error occurs. """
    return None

  def detach(self):
    """ detach()
    
    Close the socket object without closing the underlying file descriptor.
    The object cannot be used after this call, but the file descriptor
    can be reused for other purposes.  The file descriptor is returned. """
    pass

  family = None

  def fileno(self):
    """ fileno() -> integer
    
    Return the integer file descriptor of the socket. """
    return 1

  def getblocking(self):
    """ getblocking()
    
    Returns True if socket is in blocking mode, or False if it
    is in non-blocking mode. """
    pass

  def getpeername(self):
    """ getpeername() -> address info
    
    Return the address of the remote endpoint.  For IP sockets, the address
    info is a pair (hostaddr, port). """
    return None

  def getsockname(self):
    """ getsockname() -> address info
    
    Return the address of the local endpoint.  For IP sockets, the address
    info is a pair (hostaddr, port). """
    return None

  def getsockopt(self, level, option, buffersize=None):
    """ getsockopt(level, option[, buffersize]) -> value
    
    Get a socket option.  See the Unix manual for level and option.
    If a nonzero buffersize argument is given, the return value is a
    string of that length; otherwise it is an integer. """
    return None

  def gettimeout(self):
    """ gettimeout() -> timeout
    
    Returns the timeout in seconds (float) associated with socket
    operations. A timeout of None indicates that timeouts on socket
    operations are disabled. """
    return None

  def ioctl(self, cmd, option):
    """ ioctl(cmd, option) -> long
    
    Control the socket with WSAIoctl syscall. Currently supported 'cmd' values are
    SIO_RCVALL:  'option' must be one of the socket.RCVALL_* constants.
    SIO_KEEPALIVE_VALS:  'option' is a tuple of (onoff, timeout, interval).
    SIO_LOOPBACK_FAST_PATH: 'option' is a boolean value, and is disabled by default """
    return None

  def listen(self, backlog=None):
    """ listen([backlog])
    
    Enable a server to accept connections.  If backlog is specified, it must be
    at least 0 (if it is lower, it is set to 0); it specifies the number of
    unaccepted connections that the system will allow before refusing new
    connections. If not specified, a default reasonable value is chosen. """
    pass

  proto = None

  def recv(self, buffersize, flags=None):
    """ recv(buffersize[, flags]) -> data
    
    Receive up to buffersize bytes from the socket.  For the optional flags
    argument, see the Unix manual.  When no data is available, block until
    at least one byte is available or until the remote end is closed.  When
    the remote end is closed and all data is read, return the empty string. """
    return None

  def recv_into(self, buffer, nbytes=None, flags=None):
    """ recv_into(buffer, [nbytes[, flags]]) -> nbytes_read
    
    A version of recv() that stores its data into a buffer rather than creating
    a new string.  Receive up to buffersize bytes from the socket.  If buffersize
    is not specified (or 0), receive up to the size available in the given buffer.
    
    See recv() for documentation about the flags. """
    return None

  def recvfrom(self, buffersize, flags=None):
    """ recvfrom(buffersize[, flags]) -> (data, address info)
    
    Like recv(buffersize, flags) but also return the sender's address info. """
    return (None, None)

  def recvfrom_into(self, buffer, nbytes=None, flags=None):
    """ recvfrom_into(buffer[, nbytes[, flags]]) -> (nbytes, address info)
    
    Like recv_into(buffer[, nbytes[, flags]]) but also return the sender's address info. """
    return (None, None)

  def send(self, data, flags=None):
    """ send(data[, flags]) -> count
    
    Send a data string to the socket.  For the optional flags
    argument, see the Unix manual.  Return the number of bytes
    sent; this may be less than len(data) if the network is busy. """
    return None

  def sendall(self, data, flags=None):
    """ sendall(data[, flags])
    
    Send a data string to the socket.  For the optional flags
    argument, see the Unix manual.  This calls send() repeatedly
    until all data is sent.  If an error occurs, it's impossible
    to tell how much data has been sent. """
    pass

  def sendto(self, data, flags=None, address=None):
    """ sendto(data[, flags], address) -> count
    
    Like send(data, flags) but allows specifying the destination address.
    For IP sockets, the address is a pair (hostaddr, port). """
    return None

  def setblocking(self, flag):
    """ setblocking(flag)
    
    Set the socket to blocking (flag is true) or non-blocking (false).
    setblocking(True) is equivalent to settimeout(None);
    setblocking(False) is equivalent to settimeout(0.0). """
    pass

  def setsockopt(self, level, option, arg0):
    """ setsockopt(level, option, value: int)
    setsockopt(level, option, value: buffer)
    setsockopt(level, option, None, optlen: int)
    
    Set a socket option.  See the Unix manual for level and option.
    The value argument can either be an integer, a string buffer, or
    None, optlen. """
    pass

  def settimeout(self, timeout):
    """ settimeout(timeout)
    
    Set a timeout on socket operations.  'timeout' can be a float,
    giving in seconds, or None.  Setting a timeout of None disables
    the timeout feature and is equivalent to setblocking(1).
    Setting a timeout of zero is the same as setblocking(0). """
    pass

  def share(self, process_id):
    """ share(process_id) -> bytes
    
    Share the socket with another process.  The target process id
    must be provided and the resulting bytes object passed to the target
    process.  There the shared socket can be instantiated by calling
    socket.fromshare(). """
    return None

  def shutdown(self, flag):
    """ shutdown(flag)
    
    Shut down the reading side of the socket (flag == SHUT_RD), the writing side
    of the socket (flag == SHUT_WR), or both ends (flag == SHUT_RDWR). """
    pass

  timeout = property(None, None, None,
                     """ the socket timeout """
                     )

  type = None

class timeout(OSError):

  pass